Shipbucket
http://shipbucket.com./forums/

Canada - Orca class Patrol Craft, Training
http://shipbucket.com./forums/viewtopic.php?f=12&t=5914		 Page 1 of 1
Author:  Jacky Tar [ February 16th, 2015, 6:13 pm ]
Post subject:  Canada - Orca class Patrol Craft, Training
Previously submitted in the Beginner's forum and tweaked there. No comments on it in over a year now, so at Gollevainen's suggestion, here it is. I should also note that Carnac had previously posted an Orca drawing as well (http://www.shipbucket.com/forums/viewto ... =12&t=1260). I didn't know that at the time I started on my version or I wouldn't have done so, so as not to step on his toes.

[ img ]

Class composition:
PCT 55 Orca
PCT 56 Raven
PCT 57 Caribou
PCT 58 Renard
PCT 59 Wolf
PCT 60 Grizzly
PCT 61 Cougar
PCT 62 Moose

Specifications:
Displacement: 210 tonnes
Length: 33 m
Beam: 8.34 m
Draft: 2.6 m
Machinery: 2 x Caterpillar 3516B diesel engines, 2500 shp @ 1600 rpm; each driving 1 screw
Speed: 20 kts
Crew: 4
Accommodation: 4 crew, 20 instructors/students
Armament: Normally unarmed; can be fitted with 1 x 12.7mm M2 machine gun on fo'c'sle (2 so fitted for harbour security during 2010 Winter Olympics in Vancouver, BC)

NOTE: These are not commissioned warships of the RCN and as such do not bear the prefix HMCS.

References:
1) View from stbd side looking port and aft
2) View from port side looking stbd
3) Courtesy of Rodondo - Stbd side profile
4) Royal Canadian Navy page on Orca class
5) Wikipedia page on Orca class
Author:  Radome [ February 16th, 2015, 7:17 pm ]
Post subject:  Re: Canada - Orca class Patrol Craft, Training
It's very good for a start!
I think you should use some shade on it, as it is now it looks kinda flat.
Some of the pieces should be outlined in black like the anchor, crane, doors and hatches.
Also in my opinion you should use diffrent tone colors for the hull and structure. Abit darker tone for hull and lighter for structure.
Author:  Jacky Tar [ February 17th, 2015, 5:31 pm ]
Post subject:  Re: Canada - Orca class Patrol Craft, Training
Re: shading - my understanding is that we're supposed to use no more than three shades of the basic hull/superstructure colours - a lighter colour for highlights, and a darker colour for some shadowing (e.g., the hull strake forward). I can try tweaking the colour for more shading separation, though.

Outlining - I'll give the doors/hatches a go at outlining in black. I'm kind of reluctant to screw around with the crane since I just grabbed it off a parts sheet.

Thanks for the feedback!
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/