Anyone who can help me with the right RHIB to the Albion Class?
| Shipbucket http://shipbucket.com./forums/ |
|
| RHIB to the Albion LPD Class http://shipbucket.com./forums/viewtopic.php?f=16&t=716 |
Page 1 of 1 |
| Author: | KimWerner [ February 1st, 2011, 5:40 pm ] |
| Post subject: | RHIB to the Albion LPD Class |
Anyone who can help me with the right RHIB to the Albion Class?
|
|
| Author: | acelanceloet [ February 1st, 2011, 5:49 pm ] |
| Post subject: | Re: RHIB to the Albion LPD Class |
well, find pictures, the name of the thing or the lenght or whatever..... if it is up to me, the standard for RHIB's will be like the ones on the dutch parts sheet, but those aren't the same type as the royal navy uses, so those have to be drawn. so if an new one should be used, it better be good. 
|
|
| Author: | KimWerner [ February 4th, 2011, 12:58 am ] |
| Post subject: | Re: RHIB to the Albion LPD Class |
Wauw! That was a tough one! I found the same RHIB on RN River OPV Class. Via the vessels data sheet I've identified the RHIB as the 7 m Halmatic Pacific 22 Mk. II. It is propelled by a single HJ241 waterjet driven by a inboard diesel engine. Russia and India had just buyed several numbers of the Mk. I model. It looks as Mk. II but I'm doubtful if the only difference is the engine or the propulsion too? Hope you will enjoy it and use it in the equipment parts sheet!
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|